Turn Your X2D Into a Pen Plotter
Convert your Bambu Lab X2D into a powerful pen plotter with a 227×212mm plot area. Print the Sebas toolhead, create your design, and plot — with presets tuned for Stabilo Point 88 at Z-Draw: 14, Z-Lift: 25.
€29.90 one time (limited time offer) • Lifetime access • Includes pen holder STL, G-code generator, 50+ fonts, and gallery access.
From X2D to Pen Plotter in 3 Steps
No complex calibration required — follow the setup guide and start plotting.
Print the Pen Holder
Download the Sebas X2D pen holder STL from Resources and print it on your X2D. Takes about 1 hour with standard settings.
Create Your Design
Use our web app to create designs from text, images, or freehand drawing. Select "Bambu Lab X2D" from the printer dropdown.
Generate & Plot
Click generate, download the G-code, copy it to a USB stick, and plug it into your X2D. Watch your printer draw on the 227×212mm area!
Everything You Need for X2D Plotting
X2D Pen Holder STL
Download the Sebas X2D pen plotter toolhead STL — designed specifically for the dual-nozzle X2D head. Print it on your X2D in about an hour.
One-Click G-code
Generate plot-optimized G-code from text, images, or drawings. No manual editing, no Inkscape plugins needed.
X2D Presets
Pre-configured bed size (256×256mm), Z-Draw: 14, Z-Lift: 25, and optimized speeds. Select X2D and start plotting.
50+ Hershey Fonts
Single-stroke fonts designed for pen plotting. Create beautiful text art that plots cleanly every time.
Enclosed Build Chamber
The X2D enclosed design keeps your plots dust-free and protected. Perfect for detailed artwork.
Start Pause, No Finish Pause
Attach the pen holder at the start pause, then plot — the printer homes automatically when done (no end-of-job pen removal pause).
See the X2D in Action
Watch pen plotting in real-time on the Bambu Lab X2D.
Terrain wireframe — plotted with Stabilo Point 88 fine 0,4
X2D Plotting Specs
| Plot Area | 227 × 212 mm |
| Pen Holder | Sebas X2D STL |
| Recommended Z | Z-Draw: 14, Z-Lift: 25 |
| Setup Time | < 30 minutes |
| Max Travel Speed | 1000 mm/s |
| Fonts Included | 50+ |
| Price | €29.90 one time (for a limited time) |
Frequently Asked Questions
Will pen plotting damage my X2D?
No. Pen plotting only uses X/Y movement at low speeds, no heating, no extrusion. The pen holder is lightweight and movements are gentler than actual 3D printing.
What pens work with the X2D pen holder?
Our Sebas X2D holder fits standard pens and markers: Sakura Pigma Micron, Staedtler fineliners (Stabilo Point 88 recommended), Sharpies, gel pens, and most pens with 8–12mm diameter.
Can I still use my X2D for 3D printing?
Absolutely! The pen holder clips on and off easily. Switch between plotting and printing whenever you want — no permanent modifications needed.
What's the maximum plot size on X2D?
The P2S has a 256×256mm bed. With Sebas's dedicated pen plotter toolhead, the pen cannot reach within 35mm of the back, 29mm of the right, 9mm of the front — giving a maximum plot area of 227 × 212 mm. The left edge is fully usable.
Do I need to remove the pen before the printer homes?
No — X2D exports skip the finish pause by default. Attach the pen at the start pause, plot your design, and the printer homes automatically when the job completes.
Is the X2D pen holder the same as P2S?
No. The X2D uses a dedicated Sebas pen plotter toolhead with its own STL and Z-Draw preset (14 mm vs 17 mm on P2S). Use the X2D-specific holder and settings for best results.
Ready to Turn Your X2D Into a Plotter?
Join makers who've unlocked pen plotting on their Bambu Lab printers.